stk format, to view or edit this tune in WinPv it must be first be converted to a Power Vision calibration. Q) How do I save & view my original tune?Ī) This original ECM calibration is automatically backed up when you marry your Power Vision to your ECM and is saved in. To do so using your PV device select Program Vehicle>Load Copy>Copy of Original>you will then save to a slot in the Tune Manager. The original tune is a copy of the original binary that was in your ECM before the Power Vision was married to your ECM.Ī) When you marry your Power Vision the original tune in your ECM is automatically backed up and saved in your Power Vision, you will also be prompted to save this to your computer when you connect to the WinPv software. Fuel Moto tunes are maps that have been developed in-house by Fuel Moto, they are proprietary and distributed to FM customers. Q) What is the difference between the Dynojet Preconfigured tunes, a Fuel Moto tune, and my original tune?Ī) The Dynojet Preconfigured tunes are maps that have been developed by Dynojet Research, they are pre-loaded on the PV device and can be updated via the PV update client. Again, I could have accomplished the same thing doing channel scans with the TVs, but that would have taken hours rather than three or four minutes.A) Ports are located on the right side of the unitĪ) You will flash the Fuel Moto tune by going to Program Vehicle>Load Tune>Custom Tunes >choose tune from Tune Manager>Select Flash TuneĪ) If you have purchased your Power Vision from Fuel Moto the appropriate tune will be loaded in Slot 1 of the Tune Manager So the meter and the app definitely produced an improvement in every situation. In our Oceanside, California, test spot, the channel count rose from 18 to 21 channels when I optimized the position. In my other room, where the five-step LED meter of the RCA ANT3ME1 proved to be no help, the detailed data in the Connected app allowed me to go from 82 channels in my original testing position to 110 channels (three more than the app promised). In my living room, the Flatwave Amped Pro pulled in 57 stations from the aesthetically convenient position where I also tested all the other antennas using the meter, I quickly found a position where I could get 112 channels (exactly what the app promised). It provides a count of strong, moderate, and weak stations that it updates every six seconds. Using the meter requires downloading the Winegard Connected app for iOS or Android and pairing your mobile device through Bluetooth. If you already have a strong TV signal in the room where you’re placing the antenna, the meter likely won’t offer an advantage. However, in that room, no matter where I moved the antenna, I couldn’t get the fifth LED to light, so the signal-level meter was of no help. In a different room, the ANT3ME1 pulled in 142 channels versus 130 with the ClearStream Flex and only 73 with the original ANT3ME. Moving the antenna to an adjacent wall caused an extra LED to illuminate and bumped the channel count up to 115, tying the Antennas Direct ClearStream Flex and improving on the 92 channels I got with the previous model. When I mounted the ANT3ME1 in the same aesthetically convenient place I used for the other antennas, three LEDs illuminated on the meter and the antenna picked up 51 channels out of 144, 11 more than the older model achieved in the same position a few minutes earlier. In my living room, where TV signals are fairly weak, getting even one extra LED to light up on the meter made a huge difference. Most indoor antennas today-and most of the ones we looked at-are flat. Unobtrusive design: You may need to put your antenna in a visible location for the best reception, so it shouldn’t be ugly.(If you need a longer cable, an extension cable with the necessary coupler is available for about $10.) At least a 10-foot cable: Because location is the key to good reception, a 10-foot cable gives you more flexibility.Easy to mount and move: You should be able to hang the antenna on a wall without needing tools or causing major damage to your wall, and the antenna should be easy to move for better reception.Simple to assemble and install: You shouldn’t need tools to put together an indoor antenna.However, recent broadcast-transmission changes have made VHF reception more important. For many years, an indoor antenna’s ability to pull in VHF signals was less important because most digital TV channels reside in the UHF range. Both UHF and VHF: All the antennas on our final list were rated for both UHF (channels 14 and above) and at least high-VHF (channels 7 to 13) reception.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |